 |
|
|
|
|
|
Channel Master
Signal Meters
Satellite Signal Meters
|
| |
|
|
|
|
|
|
Uses
Receiver voltage |
|
|
| 1004IFD Satellite IF amp and broadband
detector; derives meter and variable frequency audio tone. Dish aligned for maximum meter
deflection or highest pitch tone. Gain control allows range of input signal levels,
measurements of voltage on cable and LNBF current. The Meter output must be
connected to the satellite receiver in order to supply power. The units operate from
11-24 VDC on the coaxial cable. Easy to carry, less than 6" long with carrying
strap. See specifications
- How to use signal meter |
1007IFD
 |
Meter Features 22 khz tracking and internal Battery Pack - Carry strap -
Wall plug charging unit - Meter and variable frequency audio tone - Dish aligned for
maximum meter deflection or highest pitch tone - Gain control allows range of input signal
levels - Includes Battery Pack 13/18 volt so meter can be used without receiver for ease
of installation See specifications
How
to use signal meter
|
|
|
|
|
|
|
|
 |
10081FD Includes
- Internal Rechargeable NiCad battery pack
- Carrying strap
- Wall plug recharging unit
- 13/18 V Battery pack and charger
- 5.5 lbs shipping weight
|
| Tune 2 Satellites at
Once - Quick Alignment |
| The 1008IFD includes two meters in one
housing, allowing easy alignment of dual satellite single dish installations. When
peaking, the dish signal level can be viewed for both LNBs simultaneously, making
alignment quick and easy. Carrying case included w/battery |
Save Big Was 239.95 See specifications
|
|
|
|
|
|
|
|
|
Acutrac III Ka/Ku Satellite Signal Meter
Details:
The Acutrac III is an affordable, compact
satellite signal meter that is capable of reception of both the Ka
Band signals and the Ku Band signals. The incorporated data port on
the meter allows the Acutrac III to remain flexible with future
expansion and developments by giving the user simple access to
firmware, or software upgrades.
-
Supplied
with 8 "AA" NiMH rechargeable cells with 2400mAH capacity rating
-
Comes
with neoprene rubber insulation case cover and carrying strap
-
AC wall
transformer included (12VDC 300mA), as well as the DC auto
charging cord
-
Will
also accept standard
Alkaline batteries for short term use
-
The
meter powers the LNB assembly with the internal power supply
-
LCD
Thermometer-type scales with non specific numerical reference in
"tenths" are to be maximized for the highest possible reading of
the analog carrier wave
-
A "must have" signal meter for AT9 antenna
installation.
|
|
|
|
|
|
Budget Signal Meter |
|
|
|
Most Shipments Processed in
24 hours
Allow 5-7 Business Days
503-253-9618
Support
| Commercial
Electronics Inc. |
|
12645 SE Madison St. |
|
Portland Oregon 97233 |
|
|
