| The 4DTV REMOTE is
the universal replacement for both the DSR920 as well as the newer version
DSR922 UHF receivers. The new ergonomic styling sets this apart from its
previous predecessor of the rectangular rounded corner older version, but works
equally well, key for key. The satellite receiver function is pre
progammed and requires no setting, however in order to adjust sound, the TV
setting must be set in order to control volume (from TV function) when using
the RF output from receiver. There is a scanning process to locate some
of the harder to find codes (unlisted in setup manual)
Quick Scan
Procedure
Setup Process
- Press function TV, VCR key for at least
three seconds - until led flashes. Press same key again, but don't hold it. Led
will remain on without blinking
- While pointing at TV (VCR) press Arrow Up
key to go to next code
- Keep pressing same (arrow up) until TV
set turns off
- Press the TV key once again to store
|